where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
Issue '2017-03'
Vol.22 No.03 - The e-Journal of Nondestructive Testing - ISSN 1435-4934
Summary

NDT Canada 2017 June 6-8 in Quebec, Canada

Abstract Submission Closing Soon.
New Events & Web Resources |more|
18 News in this issue
Sonotron NDT provides the PA UT based solution for the rapid detection of the fatigue cracks in the actuators of the leading edge flaps
Sonotron NDT
TecScan introduces the ultraSCAN Mx Flatbed Squirter System
TecScan Systems
A new Ultrasonic Laser Inspection System Jointly Developed by Airbus and Tecnatom Improves Efficiency in Aircraft Production
Tecnatom S.A.
Eddyfi Expands IRIS Product Family
PRAGMA introduces the new PragmaPro instrument platform
PRAGMA
JIREH Industries Releases Nozzle Scanner
Jireh Industries
Looking inside materials the smart way
Fraunhofer-Institute for Non-Destructive Testing (IZFP)
Zetec to Exhibit at NACE CORROSION 2017 Conference & Expo
Zetec
Hoch produktive Prozessoptimierung und Metrologie mit automatisierter inline CT
GE Inspection Technologies
GE Inspection Technologies Receives Frost & Sullivan’s Industrial Computed Tomography of the Year Award 2016
GE Inspection Technologies
New Building, New Start, New Journey To Celebrate DOPPLER Office Warming
Doppler Electronic Technologies Co., Ltd
Zetec to Host Webinar on ‘Time Reversal’ Inspection Technique for Composite Structures in Aerospace
Zetec
Phoenix ISL appoints Business Development Manager
Phoenix Inspection Systems Ltd
Peter Chen Joins Zetec as General Manager, Asia
Zetec
Katharine Morgan Becomes President of ASTM International
ASTM International
The ICNDT Journal - Volume 9 Issue No. 1
International Committee for Non-Destructive Testing (ICNDT)
ZfP-Zeitung Ausgabe 153
Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZfP)
NDT Canada 2017 Call for Papers
Canadian Institute for NDE (CINDE)
Table of Contents
55 Articles in
Issue: 2017-03
Filter Results ...
Publications
iCT 2017 (54)
NDT.net Journal (1)
Exhibitors (5)
Innovation Pol.. 1
Materials Rese.. 1
Volume Graphic.. 1
YXLON Internat.. 2
Title / Author(s) / Keywords Publication
Low Velocity Elastomer Polymer Wedges Applied to Phased Array Probes
E. Ginzel198, R. Ginzel222, R. MacNeil24
1Materials Research Institute101, Waterloo, Canada
2Innovation Polymers6, Kitchener, Ontario, Canada
Phased-array, polymers, S-scans, ultrasonic

NDT.net Journal
iCT 2017 CT in NDT and Manufacturing
X-ray computed tomography for the detection of corrosion-induced damage at the reinforcement-concrete interface
C. Van Steen, M. Wevers54, E. Verstrynge5
aDepartment of Civil Engineering bDepartment of Materials Engineering; Catholic University of Leuven (KU Leuven) 103, Leuven, Belgium
materials characterization, Computed Tomography, reinforced concrete, mechanical effects, corrosion

iCT 2017
Session: CT in NDT and Manufacturing
iCT 2017 CT in NDT and Manufacturing
Recognition of diamonds and fragments after machining by means of 3D CT
T. Grulich, U. Hassler41
Development Center X-ray technology EZRT; Fraunhofer Institute for Integrated Circuits (IIS)184, Fürth, Germany
Computed Tomography, Registration, Classification

iCT 2017
Session: CT in NDT and Manufacturing
iCT 2017 CT in NDT and Manufacturing
Comparison of methods for online inspection of apple internal quality
M. Van Dael14, P. Verboven15, L. Van hoorebeke26, J. Sijbers318, B. Nicolai14
1Mechatronics, Biostatistics and Sensors (MeBioS); Catholic University of Leuven (KU Leuven) 103, Leuven, Belgium
2Physics and Astronomy; University of Ghent (UGent)51, Ghent, Belgium
3iMinds-Vision Lab, Department of Physics; University of Antwerpen34, Antwerpen, Belgium
reconstruction, segmentation, Computed Tomography, agrofood, online, inspection, X-ray

iCT 2017
Session: CT in NDT and Manufacturing
iCT 2017 CT in NDT and Manufacturing
Contactless characterization of electric structures with simulation models based on CT data
C. Jauch1, J. Denecke14, J. Kühnle1, I. Effenberger19, J. Hillebrand25, S. Kieß28, S. Simon210
1Fraunhofer Institute for Manufacturing Engineering and Automation (IPA)14, Stuttgart , Germany
2Institute for Parallel and Distributed Systems (IPVS); University of Stuttgart283, Stuttgart , Germany
NDT-wide, Metals, segmentation, Dimensional metrology, Electromagnetic field simulation, Scattering parameters, voxel data processing, 3D-model extraction

iCT 2017
Session: CT in NDT and Manufacturing
iCT 2017 CT in NDT and Manufacturing
Analysis of Baroque Sculpture Based on X-Ray Fluorescence Imaging and X-ray Computed Tomography Data Fusion
D. Vavrik119, I. Kumpova115, J. Lauterkranc22, M. Vopalensky19
1Institute of Theoretical and Applied Mechanics; Czech Academy of Sciences (CAS)112, Prague, Czech Republic
2InsightArt2, Prague, Czech Republic
Radiographic Testing (RT), materials characterization, data fusion, Computed Tomography, X-ray Florescence Imaging

iCT 2017
Session: CT in NDT and Manufacturing
iCT 2017 CT in NDT and Manufacturing
Synchrotron X-ray computed tomography for assessment of shock tube systems
F. Léonard7, H. Krebs, G. Bruno21, U. Hasenfelder
aDivision 8.5 Micro NDE bDivision 2.3 Explosives; BAM Federal Institute for Materials Research and Testing1301, Berlin, Germany
materials characterization, Computed Tomography, energetic systems, blasting, shock wave, nonel, explosives

iCT 2017
Session: CT in NDT and Manufacturing
iCT 2017 CT in NDT and Manufacturing
3-D Reconstruction of Iron Gall Ink Writings
D. Stromer12, A. Maier14, T. Schön217, W. Holub213
1Pattern Recognition Lab; University of Erlangen-Nürnberg (FAU)42, Erlangen, Germany
2Dev. Center for X-ray Technology; Fraunhofer Institute for Integrated Circuits (IIS)184, Fürth, Germany
reconstruction, Computed Tomography, Historical Document Analysis, Iron Gall Ink, X-Ray imaging, 3-D reconstruction

iCT 2017
Session: CT in NDT and Manufacturing
iCT 2017 CT in NDT and Manufacturing
Investigation of the European Retrievable Carrier (EURECA) at different scales by means of X-ray radiography and computed tomography
M. Plamondon8, C. Stritt4, S. Kolokytha2, T. Lüthi12, R. Kaufmann9, A. Flisch28, A. NEELS3
aCenter for X-ray Analytics bCenter for X-ray ; Empa, Swiss Federal Laboratories for Materials Science and Technology77, Dübendorf, Switzerland
Computed Tomography, high-energy X-ray CT, radiography, linear accelerator, multi-scale analysis

iCT 2017
Session: CT in NDT and Manufacturing
iCT 2017 CT in NDT and Manufacturing
Investigating the influence of the energy density distribution on the quality of laser sintered polyamide-12 parts by using X-Ray Computed Tomography
M. Pavan15, P. Van Den Ecker1, T. Craeghs16, J. Kruth212, W. Dewulf221
1PMA - Mechanical Engineering Department; Materialise NV6, Leuven, Belgium
2PMA - Mechanical Engineering Department; Catholic University of Leuven (KU Leuven) 103, Leuven, Belgium
materials characterization, porosity, Computed Tomography, X-ray Computed Tomography, Laser Sintering, Porosity Analysis, Energy Density Mapping, Quality Control

iCT 2017
Session: CT in NDT and Manufacturing
iCT 2017 CT Metrology
Investigation on the effects of X-ray CT system geometrical misalignments on dimensional measurement errors
V. Aloisi15, S. Carmignato117, J. Schlecht24, E. Ferley24
1Department of Management and Engineering; University of Padova (UNIPD)32, Padova, Italy
2North Star Imaging, Inc. (NSI)11, Rogers, MN, USA
Dimensional metrology, Computed Tomography, traceability, geometrical misalignments, accuracy

iCT 2017
Session: CT Metrology
iCT 2017 CT Metrology
Measurement of the internal surface texture of additively manufactured parts by X-ray computed tomography
A. Thompson, L. Körner2, N. Senin2, S. Lawes2, M. Ian, R. Leach3
Faculty of Engineering; University of Nottingham18, Nottingham, United Kingdom
Other Methods, Metals, metrology, Dimensional metrology, Computed Tomography, additive manufacturing, surface texture

iCT 2017
Session: CT Metrology
iCT 2017 CT Metrology
Development of an interlaboratory comparison investigating the generation of areal surface texture data per ISO 25178 from XCT
A. Townsend3, L. Blunt4, P. Bills4, R. Racasan4
EPSRC Centre for Innovative Manufacturing in Advanced Metrology, School of Computing and Engineering; University of Huddersfield12, Huddersfield, United Kingdom
Metals, Computed Tomography, ISO 25178 surface texture, Additive manufacturing, interlaboratory comparison

iCT 2017
Session: CT Metrology
iCT 2017 CT Metrology
X-ray spectrum dependence of the magnification of cone-beam CT
J. Illemann7, M. Bartscher33
Physikalisch-Technische Bundesanstalt (PTB)44, Braunschweig, Germany
Measurement Uncertainty, Simulation, Dimensional metrology, beam hardening, Computed Tomography, material dependence, cone-beam CT, scintillator, magnification, geometrical model

iCT 2017
Session: CT Metrology
iCT 2017 CT Metrology
Experimental investigation of new multi-material gap reference standard for testing computed tomography systems
P. Hermanek13, F. Borges De Oliveira25, M. Bartscher233, S. Carmignato117
1Department of Management and Engineering (DTG); University of Padova (UNIPD)32, Padova, Italy
2Physikalisch-Technische Bundesanstalt (PTB)44, Braunschweig, Germany
Dimensional metrology, Computed Tomography, gap measurements, multi-material measurements, performance verification, measurement errors

iCT 2017
Session: CT Metrology
iCT 2017 CT Metrology
Creating a Multi-material Probing Error Test for the Acceptance Testing of Dimensional Computed Tomography Systems
F. Borges De Oliveira15, A. Stolfi26, M. Bartscher133, M. Neugebauer14
1Physikalisch-Technische Bundesanstalt (PTB)44, Braunschweig, Germany
2Technical University of Denmark (DTU)25, Kgs. Lyngby, Denmark
Dimensional metrology, Computed Tomography, Probing error test (P-test), Acceptance testing, Multi-material measurements, Computed tomography (CT), Standardization

iCT 2017
Session: CT Metrology
iCT 2017 CT Metrology
Characterization of microshells experimented on Laser Megajoule using X-Ray tomography
A. Choux5, L. Barnouin2, L. Reverdy4, M. Theobald4
Centre de Valduc; CEA 6, Is Sur Tille, France
materials characterization, Dimensional metrology, Computed Tomography, X-ray tomography, characterization, LMJ targets

iCT 2017
Session: CT Metrology
iCT 2017 CT Metrology
A Preliminary Investigation on Surface Roughness Assessment of Complex Additive Manufactured Parts Scanned by X-ray Computed Tomography
S. Lou2, H. Abdul-Rahman, W. Zeng2, X. Jiang2, P. Scott3
EPSRC Centre for Innovative Manufacturing in Advanced Metrology; University of Huddersfield12, Huddersfield, United Kingdom
Dimensional metrology, additive manufacturing, computed tomography, surface roughness, diffusion filtering, triangular mesh

iCT 2017
Session: CT Metrology
iCT 2017 Keynote
New X-ray computed tomography methods for research and industry
J. Kastner120
Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
materials characterization, Dimensional metrology, Dual-energy, Computed Tomography, Phase contrast,

iCT 2017
Session: Keynote
iCT 2017 Materials Characterization
CT applied as a reference technique for evaluating active lock-in thermography in characterizing CFRP impact damage test samples
C. Baldo17, S. Ekanayake22, R. Schmitt216, C. Isenberg25, A. Albertazzi32, T. Fernandes46
1Center for Engineering, Modeling and Applied Social Sciences (CECS); Federal University of ABC (UFABC)7, Santo André, Brazil
2Laboratory of Machine Tools and Production Engineering (WZL); RWTH Aachen University50, Aachen, Germany
3Department of Mechanical Engineering (EMC); Federal University of Santa Catarina (UFSC)19, Florianópolis, Brazil
4Reference Centres in Innovative Technologies; CERTI Foundation12, Florianópolis, Brazil
Other Methods, computed tomography, thermography, composite materials, impact damage detection

iCT 2017
Session: Materials Characterization
 
Page:
 -1-   2   3 
next pageNext
Actual Cooperations
Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window