- since 1996 -
|Beta-Version of this Page View|
|NDT.net Issue - 2011-04 - NEWS ||NDT.net Issue: 2011-04|
Publication: e-Journal of Nondestructive Testing (NDT) ISSN 1435-4934 (NDT.net Journal)
James Bond Test MK III Developed for Adhesion, Bond and Other Tensile Strength TestingJames Instruments Inc., Chicago, IL, USA
James Instruments Inc. manufacturer of the world's most advanced Non Destructive Test Equipment for construction materials has developed the James Bond Test MK III for measuring the bond strength/tensile strength/adhesion strength of concrete, asphalt, tile, concrete repair, or other overlay material by the direct tension or pull off method. It uses disc attached to the material under test to,
1. Measure the near surface strength of a substrate in order to determine the substrates quality before applying an overlay.
2. Determine the bond strength of a repair or overlay material after it is applied to the substrate
3. Determine the tensile strength of a repair, overlay or adhesive after the material is applied to the surface
The James Bond Tester MK III has been successfully used to verify the quality of existing materials,as well as determine the adhesion strength of shotcrete, tile, epoxies, paint and other repair materials, mortars or coatings. Adequate direct tensile strength between two layers is important if repairs to concrete structures or additional overlays on existing concrete are to be structurally sound. The James Bond Tester MK III involves bonding a circular steel disc to the surface by means of an epoxy resin adhesive. A controlled tensile force is then applied to the disc and failure will occur at the weakest point: either in the host material, or in the bond between overlay and host material.
James Bond Test on Asphalt The new test has been developed with features to simplify the testing process for the professional engineer. These include:
"The bond strength of overlays has become an increasingly significant parameter in the construction community, especially as our infrastructure ages. This new test has been designed from the feedback of users of our previous Bond Test systems and incorporates many features that the professional testing community demanded." says Michael W. Hoag, President of James Instruments Inc."The bond strength of overlays has become an increasingly significant parameter in the construction community, especially as our infrastructure ages. This new test has been designed from the feedback of users of our previous Bond Test systems and incorporates many features that the professional testing community demanded." He continues "as the company has grown and aged we have been able to learn from our previous designs and produce cutting edge equipment that incorporates ideas, that although initially not obvious, greatly facilitate performing the test in the field and provide reliable results."
The James Bond Tester MK III has been constructed to the highest standards and conforms to the following standards:
* ISO 4624 Paints and varnishes -- Pull-off test for adhesion * EN 1015-12 Methods of test for mortar for masonry. Determination of adhesive strength of hardened rendering and plastering mortars on substrate * EN 1348 Determination of Tensile Adhesion Strength for Cementitious Adhesives * BS 1881 Part 207 Testing concrete. Recommendations for the assessment of concrete strength by near-to-surface tests * ASTM C 1583 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method) * ASTM D 4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers * ACI 503-30 Guide for the Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed and Hardened Concretes * DIN 1048 Part 2 Testing concrete; testing of hardened concrete (specimens taken in situ)
James Instruments Inc. is the leading manufacturer of non-destructive test equipment for construction materials, specifically concrete, ceramic, wood and other coarse grained materials. We supply the instruments that: measure strength, locate rebar and other objects in concrete and masonry, determine density and analyze materials ultrasonically, analyze corrosion and determine moisture in concrete and other construction materials. And more. James Instruments -- rugged, quality equipment for field use -- backed by factory service and an ongoing program of research and development. For More information regarding this or other non destructive testing equipment for construction materials you can visitwww.ndtjames.com or email email@example.com or firstname.lastname@example.org
James Instruments Inc.