where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NDT.net Issue - 2012-10 - NEWS
2012-10 NDT.net Journal,

GE's phoenix datos|x 2.2 Software Allows Complete Automation of the Computed Tomography 3D Metrology and Failure Analysis Process Chain

GE Sensing & Inspection Technologies GmbH303, Hürth, Germany
NDT.net Journal
Issue: 2012-10
Provides up to 9 Times Faster Volume Reconstruction

Wunstorf, Germany. – 20 August 2012. — The phoenix datos|x 2.2 new-generation computed tomography (CT) software from the Inspection Technologies Business of GE Measurement & Control, features fully automated data acquisition and volume processing to allow high-resolution precision metrology and failure analysis tasks to be performed significantly faster, with minimal operator training. Users of GE’s phoenix|x-ray high-resolution CT systems in a wide variety of industries and academic institutions can now benefit from a combination of time and cost effectiveness as well as from improved reproducibility of 3D measurement and failure analysis results because of the minimization of operator influence.

As Oliver Brunke, CT product manager, explains, “With phoenix datos|x 2.2, the whole scan and reconstruction process runs without any operator interaction and 3D failure analysis or metrology tasks performed with third party programs can be executed automatically. The click & measure|CT functionality allows display and analysis of the 3D results on the screen in just three steps, so that operator skill requirements are dramatically reduced, while CT analysis time is up to 5 times faster compared with the previous datos|x 1 software version.”

The intuitive graphical user interface of the new software ensures easy usage and a fast learning curve, including automated system calibration and monitoring functions for tube, detector etc. A process flow orientated function tool bar allows step-by-step workflow set-up and CT results display has been significantly improved as the 3D volume is shown not only in 2D axis views but also in a 3D render mode.

Since the entire process of the CT data acquisition through volume reconstruction to implementation of the measurement runs completely automatically, it is possible to conduct the first sampling of a complex component in less than 60 minutes. This makes dimensional measurement with CT an effective tool for many tasks in production process monitoring such as the manufacture of plastics and metal castings and precision components like injection nozzles. Particularly complex part geometries with inaccessible or hidden features can be measured with CT in many cases faster than with conventional CMM.

Compared with the current datos|x version, the new velo|CT module offers up to 9 times faster CT volume reconstruction. Depending on the volume size, the CT results are now ultra quick available in the order of seconds or minutes. Another effective tool for accelerated high throughput laboratory and production oriented CT tasks is the new batch|CT module: Due to pre programmed multi-object scans with no further interaction, it allows the degree of system usage to be enlarged by up to 20-30 % by performing various automatic CT scans and evaluations outside of the operator working time.

GE Sensing & Inspection Technologies GmbH

More of GE Sensing & Inspection Technologies GmbH published in NDT.net
2019-04-01: GE Inspection Technologies Commended by Frost & Sullivan for Leading the Industrial Computed Tomography Market with 22% Share
2019-03-01: Utilising Advanced Computed Tomography as NDT Technique in Additive Manufacturing
2019-03-01: Produktpremiere mit Metrology 2.0 – Präzisionsmessungen mit CT
2018-09-01: Vereinfachte Anwendung dynamischer Tiefenfokussierung zur Ultraschallprüfung von Luftfahrtwerkstoffen
2018-09-01: Einfluss der Fehlercharakteristik auf die Reproduzierbarkeit von Prüfanlagen
2018-09-01: Automatisierte Ultraschallprüfung von nahtlosen Stahlrohren mit Matrix-Arrays
2018-09-01: Ultraschallprüfung von Schienenprofilen mittels Phased-Array-Technik
2018-09-01: 3D Modellierung der elektro-mechanischen Wellenausbreitung in einem piezoelektrischen Ultraschallwandler aus 1-3 Komposite: Simulation und experimentelle Validierung
2018-09-01: BHGE Breaks Ground on European Customer Solutions Center for Inspection Technologies business
2018-09-01: Anwendung von Industrie 4.0 in der ZfP
All 456 Articles & News of GE Sensing & Inspection Technologies GmbH in NDT.net

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window