where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
NDT.net Issue - 2018-03 - NEWS
NDT.net Issue: 2018-03
Publication: e-Journal of Nondestructive Testing (NDT) ISSN 1435-4934 (NDT.net Journal)

MAC System Tests for Eccentricity in Copper Tube

Magnetic Analysis Corp (MAC)27, Elmsford, NY, USA

Eccentricity, where the OD and ID of a tube are not concentric, is a problem that is often created during extrusion of the billet before being drawn into a tube. Magnetic Analysis Corporation’s Echomac® ultrasonic test system detects eccentricity at a US copper tube mill that manufactures commercial and industrial grade tube and pipe. Eccentricity in the finished product can mean wall thicknesses that don’t meet specifications, causing problems during further processing downstream.

Ultrasonic transducer probes detecting eccentricity wall variation in 2.125” OD, copper tube with 0.1” wall thickness.

MAC’s Echomac® UT test is applied after the extrusion process, while the tube is being drawn in a high-speed draw-production line, prior to further reduction. The test allows accurate plotting of the actual tube wall thickness and eccentricity over the entire product length. Alarm thresholds can be used to sort material into various quality grades and this data can ultimately be used to make adjustments to the production process.

The Echomac® system uses four transducers spaced 90 degrees around the tube. This allows a very accurate calculation of eccentricity of a non-concentric tube, assuming the external and internal extrusion dies are round. A unique mechanical design is used that allows the transducers to track tube movement off of center. An encoder allows accurate tube tracking and measurement for the Echomac® electronics.

Four Channel Eccentricity testing is a special form of 4 transducer operation that is designed to measure wall variation based on four fixed points, 90 degrees apart. The Echomac® software derives the wall variation from these measurements. Eccentricity is an expression of wall variation but the definition depends on the particular user and their agreement with their customers. For example, 2 or more alarms can be set for different eccentricity sort levels, as set by the customer; 1 alarm for a min-max thickness level, irrespective of the circumferential tube orientation under the fixed transducers; and 1 channel can monitor the average wall. The operator can customize how data is presented. The test system responds only to eccentricity, an attribute of the wall thickness, and Ovality, (OD variation) which may be present, is ignored. All production data is stored and easily retrieved, including product identification, date and stamped time. Eccentricity measurement can be expressed in many forms. The MAC system offers a choice of the many different Eccentricity formula definitions.

Magnetic Analysis Corp.
103 Fairview Park Drive
Elmsford, New York 10523

Visit: Magnetic Analysis Corp (MAC)

Feedback: ()

More from "Magnetic Analysis Corp (MAC)" (5 of 26)
2020-02MAC to Feature NDT Instruments & Systems at Tube 2020 Düsseldorf NEWS
2020-01Rotomac® 40mm Eddy Current Rotary to Test Rod NEWS
2019-07Obituary: Magnetic Analysis Corp’s Long-Time President and Chairman William Gould NEWS
2019-06The Origins of Practical Electromagnetic Testing and The Historical Contributions of Magnetic Analysis Corporation to Non-Destructive Testing
2019-03Magnetic Analysis Corp. Introduces 25mm Ultrasonic Rotary to Test Small Diameter Bar NEWS
... All 26 Details >
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window