- since 1996 -
|Beta-Version of this Page View|
|NDT.net Issue - 2018-06 - NEWS ||NDT.net Issue: 2018-06|
Publication: e-Journal of Nondestructive Testing (NDT) ISSN 1435-4934 (NDT.net Journal)
Two in One: High-end camera series ImageIR® from InfraTecInfraTec GmbH35, Dresden, Germany
High-end camera series ImageIR® from InfraTec with new high-speed mode for higher frame rates and increased thermal resolution at the same time
When solving demanding thermal measurement and testing tasks, users of thermal imaging cameras with cooled detectors usually face a difficult decision: Should thermograms be acquired in a specific field of view (FOV) with a full, usually native, pixel number and the resulting high spatial resolution? Or should sequences be recorded and stored at a high frame rate in this FOV to ensure a high temporal resolution? Both at the same time is not possible, because the readout speed of the cameras limits their frame rate for a given number of pixels.
InfraTec has now resolved this balancing act and offers an entirely new level of flexibility for its high-end camera series ImageIR®. Users can choose between two speed modes for the same camera. In standard mode, the familiar frame rates for full frame, half frame and sub-frame are available with full spatial resolution. In high-speed mode, images can be taken with the identical FOV – while the frame rates increase to more than three times the previous value.
Decrease number of pixels, keep the FOV
Switch over once, benefit twice
Secondly, it will now be possible to use a single camera for the analysis of different measurement scenarios, which previously might have required the use of several different thermographic cameras. The example of the ImageIR® 9400 illustrates the wide range resulting from the latest development of InfraTec. Usually, full-frame images with (1,280 x 1,024) IR pixels at 180 Hz can be captured with this camera. Thanks to binning, in high-speed mode the frame rate for (640 x 512) IR pixels in the same FOV increases more than threefold to 625 Hz.
High-speed mode also increases the thermal resolution
With the new high-speed mode InfraTec again sets standards in the development of user-friendly thermography systems whose multivalent usability guarantees a great customer benefit. Top values at spatial and thermal resolution in conjunction with very high frame rates ensure that users can master their measuring and testing tasks with products from InfraTec's high-end camera series ImageIR® with confidence.
With its Infrared Measurement business unit, InfraTec is one of the leading suppliers of commercial thermal imaging technology. In addition to the high-end camera series ImageIR® and the VarioCAM® High Definition series, InfraTec offers turnkey thermographic automation solutions.
Spectrally single and multi channel infrared detectors, next to infrared sensors with electrically tunable filters based on MOEMS, count among the products of the infrared sensor division. These detectors can be used in gas analysis, fire and flame sensor technology and spectroscopy.
InfraTec GmbH | Infrarotsensorik und Messtechnik | Gostritzer Str. 61 – 63 | 01217 Dresden / GERMANY | Phone: +49 351 871-8630 | Fax: +49 351 871-8727 | E-mail: presse@InfraTec.de | Internet: www.InfraTec.eu|
Visit: InfraTec GmbH