where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NDT.net Issue - 2009-03 - NEWS

Olympus Introduces the WeldROVER Motorized Scanner for Nondestructive testing


Olympus Scientific Solutions Americas (OSSA)226, Waltham, MA, USA
 
NDT.net Journal
Issue: 2009-03
March 02, 2009 -- Olympus is pleased to introduce the WeldROVER TM motorized scanner for nondestructive testing (NDT) on metal plate, pipes, vessels and welded components from 4 inches (100 mm) in diameter to flat surfaces and on longseam welds from 30 inches (750 mm) in diameter or larger. The WeldROVER can be used with the modular OmniScan MX flaw detector or TomoScan FOCUS LT to provide phased array (PA), time-of-flight diffraction (TOFD), and advanced conventional ultrasound (UT) capabilities for both the basic and advanced level inspector.

The WeldROVER is part of the PV-200 family of Olympus systems that combine phased array, conventional UT, and TOFD technologies for a complete turnkey solution for code based inspections compliant to ASME, API, AWS, and similar procedures. The WeldROVER PV-200 system is designed and developed specifically to comply with these requirements. It is the only phased array system on the market today that can demonstrate a full calibration of every focal law on every channel for: time-of-flight, sensitivity (ACG as defined by ASME), TCG\DAC, and velocity.

The WeldROVER itself is a small, versatile, and easy to operate one-axis encoded motorized scanner. The scanner is operated using a two-button remote control and speed selection switch. It operates at steady speed from 5 mm/s to 50 mm/s in order to achieve a more stable inspection than with manual scanners. Data acquisition is done with either an OmniScan MXU for direct acquisition or a TomoScan FOCUS LT for computer-based acquisition.

Any Olympus UT or PA instrument with an encoder input is compatible with the WeldROVER and requires no programming besides entering the encoder information. Additionally, standard OmniScan or TomoView software is used. No two-way communication between the scanner and instrument is required. The scanner is completely controlled from the WeldROVER remote controller.

Olympus Scientific Solutions Americas (OSSA)

More of Olympus Scientific Solutions Americas (OSSA) published in NDT.net
2019-08-01: Prüfung von Kurbelwellen von Großmotoren mit der Phased Array Technik
2019-07-01: 3D Modeling Expands the Measuring Power of the Olympus IPLEX® NX Videoscope
2019-07-01: New Olympus DSX1000 Digital Microscope Offers Advanced Tools for Faster Failure Analysis
2019-07-01: Cutting the Cord: A Simple Solution for Wireless Thickness Gage Data Transfer
2019-07-01: 38-Link™ Adaptor Makes Inspections More Efficient by Enabling Wireless Thickness Data Transfer from Any 38DL PLUS® Gage
2019-06-01: Ride at Your Own Risk? Why Roller Coasters Are Much Safer than You Think
2019-05-01: 3 Tips for Accurate Small-Diameter Tubing Measurements
2019-04-01: Case Study: Inspecting Boiler Tube Welds Using the COBRA Ultrasonic Phased Array Solution Instead of Radiography
2019-04-01: Touch Down: Eddy Current Wheel Probes Help Ensure a Safe Landing
2019-03-01: Coherent Adaptive Focusing Technology for the Inspection of Variable Geometry Composite Material
All 272 Articles & News of Olympus Scientific Solutions Americas (OSSA) in NDT.net

Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window