where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
Beta-Version of this Page View
NDT.net Issue - 2013-03 - NEWS
NDT.net Issue: 2013-03
Publication: e-Journal of Nondestructive Testing (NDT) ISSN 1435-4934 (NDT.net Journal)
NEWS

ASTM Nondestructive Testing Standard Describes Testing for Phased Array Probes

ASTM International30, West Conshohocken, PA, USA

January 31, 2013 - Phased array probes are a recently developed technology that offers significant advantages in the detection, sizing and imaging of defects that can affect the structural components of airplanes, bridges, power plants and other critical areas. A new ASTM International standard describes testing that can be done on various arrays to ensure that all inspectors are using similar testing equipment.

ASTM E2904, Practice for Characterization and Verification of Phased Array Probes, was developed by Subcommittee E07.06 on Ultrasonic Method, part of ASTM International Committee E07 on Nondestructive Testing.

“ASTM E2904 should allow different inspectors to analyze defects independently and come to essentially the same conclusions on their severity,” says Michael Moles, senior technology manager, Olympus NDT, and an E07 member. New standardized arrays, along with automated scanning, will facilitate repeatable test results, according to Moles, who also notes, “Phased arrays are significantly faster, as well as providing permanent records and better imaging.”

Arrays defined in ASTM E2904 can be used by inspectors, regulators, manufacturers, laboratories, quality assurance departments and purchasing agents. Measurement data obtained from the standard will be helpful in specifying, describing, or providing performance criteria for procurement and quality assurance or service evaluation of the operation characteristics of linear phased-array ultrasonic probes.

To purchase ASTM standards, visit www.astm.org and search by the standard designation, or contact ASTM Customer Relations (phone: 877-909-ASTM; sales@astm.org). ASTM International welcomes participation in the development of its standards. For more information on becoming an ASTM member, visit www.astm.org/JOIN.

For more news in this sector, visit www.astm.org/sn-metals or follow us on Twitter @ASTMMetals.

ASTM Committee E07 Next Meeting: June 2-6, 2013, ASTM International Headquarters, West Conshohocken, Pa.
Technical Contact: Michael Moles, Olympus NDT, Waltham, Mass., Phone: 416-831-4428; michael.moles@olympusndt
ASTM Staff Contact: Kathleen McClung, Phone: 610-832-9717; kmcclung@astm.org
ASTM PR Contact: Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org

 
Feedback: ()

Share:
More from "ASTM International" (5 of 29)
2019-07-01Aaron Craft Honored with ASTM International James A. Thomas President’s Leadership Award
2019-06-01New Nondestructive Testing Standard Helps Assess, Extend Life of Parts
2019-01-01New ASTM International Standard Helps Nondestructively Test Pipe Joints
2017-03-01Katharine Morgan Becomes President of ASTM International
2016-10-01New ASTM Ultrasonic Testing Standard Helps Examine Plastic Pipe Joints
... All 29 Details >
Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window