where expertise comes together
- since 1996 -
- since 1996 -
|NDT.net Issue - 2013-06 - NEWS ||NDT.net Issue: 2013-06|
Publication: e-Journal of Nondestructive Testing (NDT) ISSN 1435-4934 (NDT.net Journal)
New ASTM Nondestructive Testing Standard Covers Examination of Mill and Kiln Girth Gear TeethASTM International30, West Conshohocken, PA, USA
Methods of examining large girth gear teeth to detect surface breaking flaws have often been time-consuming and limited in terms of data collected. However, a new ASTM International standard provides a more effective method for gear examination using eddy current array, a technology that has been widely used but, until now, not standardized.
ASTM E2905/E2905M, Practice for Examination of Mill and Kiln Girth Gear Teeth — Electromagnetic Methods, was developed by Subcommittee E07.07 on Electromagnetic Method, part of ASTM International Committee E07 on Nondestructive Testing.
Tom Shumka, president, Global Inspections–NDT Inc., and an E07 member, confirms that ASTM E2905/E2905M addresses the need to detect surface breaking flaws electronically and to accurately size any surface breaking cracks found on cast and forged mill girth gear and pinion teeth faster and more effectively than other methods.
ASTM E2905/E2905M describes a two-part procedure. The first part, using eddy current array technology, covers the ability to detect 100 percent of surface-breaking discontinuities in the addendum, dedendum and root area of a gear tooth. The second part, using alternating current field measurement, is concerned with accurate measurement of the length and depth of any cracks found in the areas specified in the first part.
“The applications for this standard include detection and sizing of surface breaking flaws in any conducting material,” says Shumka. “The principal advantages of eddy current array over other examination methods are it’s cleaner, faster, documentable and greatly improves probability of detection. Another advantage is the gear teeth do not need to be wiped down after cleaning.”
According to Shumka, the new standard will provide a quick reference to improve understanding of eddy current array testing on mill and kiln girth gear teeth across every applicable level of contractual parties. Shumka says that ECA technology, which has been used in the nuclear industry for years, is clean, fast and easily documented. In addition, the probes used in ECA can be shaped to fit complex geometries.
“In today’s world, production and uptime on industrial equipment is of utmost importance,” says Shumka. “Although most gear engineers have known about using ECA for years, most wanted a standard developed before they would consider using the method.”
To purchase ASTM standards, visit www.astm.org and search by the standard designation, or contact ASTM Customer Relations (phone: 877-909-ASTM; email@example.com). ASTM International welcomes participation in the development of its standards. For more information on becoming an ASTM member, visit www.astm.org/JOIN.
For more news in this sector, visit www.astm.org/sn-metals or follow us on Twitter @ASTMMetals.
ASTM Committee E07 Next Meeting: June 2-6, 2013, ASTM International Headquarters, West Conshohocken, Pa.
Technical Contact: Tom Shumka, Global Inspections-NDT, Inc., Kelowna, British Columbia, Canada, Phone: 250-762-5525; firstname.lastname@example.org
ASTM Staff Contact: Kathleen McClung, Phone: 610-832-9717; email@example.com
ASTM PR Contact: Barbara Schindler, Phone: 610-832-9603; firstname.lastname@example.org