- since 1996 -
|Beta-Version of this Page View|
|NDT.net Issue - 2015-06 - NEWS ||NDT.net Issue: 2015-06|
Publication: e-Journal of Nondestructive Testing (NDT) ISSN 1435-4934 (NDT.net Journal)
SteamPAC™ Surveys Steam Valves and Traps While In ServiceMISTRAS Group, Inc.7, La Porte, Tx, USA
“The SteamPAC™ device does an excellent job of not only identifying leaking valves, but also quantifying the magnitude of the leak. Quantification is critical for proper prioritization of valve maintenance. During the initial training on the use of the SteamPAC™ device we identified a leaking valve that resulted in an annual cost of $50,000.” – Duke Energy, Miami Fort “In 2007 a major mid-west utility with a 690-MW unit, found and repaired leaking cycle valves with SteamPAC™. This improved the condenser's back-pressure allowing them to realize a reduction in overall heat rate resulting in a savings of $1.6 Million in 2008.”
INTRODUCTIONHandheld leak detection system identifies and quantifies through-valve loss of normally-closed steam valves for power generation.
LOST STEAM EQUALS LOST DOLLARSThe closed loop design of a boiler directs the steam through the most efficient path for producing electricity. Thermal efficiency in a plant is the amount of steam produced versus the amount of steam that ultimately reaches the turbine. Each leaking valve along the path contributes to a reduction in efficiency. These losses require more fuel to provide the same energy at the turbine, increasing costs and stack emissions.
As the power fleet ages, so do the primary components of the plant. From isolation and stop valves to vent and relief valves, continual repair and replacement of these components is necessary to keep plants operating at optimal efficiency. Identifying the valves that are allowing the greatest loss is a critical tool in the financial management of a plant.
THE RIGHT TOOL FOR THE JOB!SteamPAC™, with a powerful formula for estimating leak rates, is used in fossil fuel plants to survey the entire inventory of steam valves and traps while in service. This results in positive impacts on Heat Rate and CO2 stack emissions.
The SteamPAC™ sensor “listens” to the turbulence created during expansion of high pressure liquids and gasses passing through a small opening.
STEAMPAC™ LOSS EXAMPLETypical 400 MW Pulverized Coal Boiler
Thermally Efficient Pulverized Coal Boiler (PCB)
Less Efficient Pulverized Coal Boiler (PCB)
Savings in fuel cost with increased thermal efficiency... At $14/ton of coal, fuel cost savings is $1100/hour ($26,400/day) by reducing loss of steam through normally closed valves - reduction of 84 tons of O2/day.
High frequency detection is not susceptible to normal operating background noise and vibration, virtually eliminating false positives seen by airborne detection.
SteamPAC™ uses a proprietary algorithm to identify through-valve gas losses and estimates leak rate. Using the readings from SteamPAC™ along with the valve type, size and differential pressure, the calculations are performed within the handheld or the supplied software.
The route-based user interface is simple and intuitive. A single button press will store readings from a valve. Wirelessly transferring the readings to a computer provides trend analysis and leak cost equivalents to justify repair and replacement.
A LONG HISTORY OF IDENTIFYING LEAKSMISTRAS | Triple 5 has been identifying boiler tube leaks for over 25 years. The Acoustic Monitoring System (AMS) is installed in over 100 power plants around the world, has identified 1000’s of leaks, saving plants millions of dollars.
CALL OR VISIT US ON THE WEB FOR MORE INFORMATION
Phone Number T: +1(609) 716-4077 • Email Address: firstname.lastname@example.org • Website: triple5.mistrasgroup.com MISTRAS | Triple 5, 195 Clarksville Road, Princet