- since 1996 -
|Beta-Version of this Page View|
|NDT.net Issue - 2015-10 - NEWS ||NDT.net Issue: 2015-10|
Publication: e-Journal of Nondestructive Testing (NDT) ISSN 1435-4934 (NDT.net Journal)
Precision Acoustics expands needle hydrophone range with 2 and 4 mm diameter probesPrecision Acoustics, Dorchester, United Kingdom
Ultrasonic equipment innovator and manufacturer, Precision Acoustics Ltd, has expanded its pressure measurement range with new 2 mm and 4 mm diameter needle hydrophones that have been designed to provide much higher sensitivity at frequencies below 1 MHz. Although primarily aimed at applications such as underwater acoustics and characterisation of low frequency transducers, the new probes also suit frequencies above 1 MHz where very weak signals need to be measured. The frequency range is sufficiently broad that the new 4mm hydrophone has been calibrated from 30 kHz to 40 MHz by NPL (London)
The new needle hydrophones are designed to be used with the HP Submersible preamplifier that provides immediate signal buffering and acts as a precision 50 Ohm source for Precision Acoustics’ high performance hydrophone system. The larger active areas of these devices provides much greater sensitivity (7V/MPa for the 4mm probe, 2.5 V/MPa for the 2mm probe). As a result these new devices have a lower noise equivalent pressure than the existing range of plug-in interchangeable probes that have diameters from 40 microns to 1 mm. These hydrophones can also be used conjunction with the A20 in-line attenuator to permit the measurement of higher amplitude signal whilst minimising the risk of preamplifier overload.
Precision Acoustics also manufacture a wide range of membrane and fibre optic hydrophones as well as ultrasonic transducers, scanning tanks and other acoustic measurement products that are exported worldwide.