where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
Beta-Version of this Page View
NDT.net Issue - 2017-02 - NEWS
NDT.net Issue: 2017-02
Publication: e-Journal of Nondestructive Testing (NDT) ISSN 1435-4934 (NDT.net Journal)
NEWS

New polyethylene pipeline integrity testing service launches in North America

TWI Ltd (The Welding Institute)191, Great Abington, Cambridge, United Kingdom

TWI has partnered with TEAM QUALSPEC – a world-class company providing specialty services related to the maintenance, inspection and construction of mechanical and piping systems – to provide the PolyTest™ service to the North American market.

PolyTest™ is a new field inspection system specifically designed for volumetric non-destructive testing of butt fusion and electrofusion joints in polyethylene (PE) pipes.

It has been used in a wide range of pipeline industries including gas, water, offshore oil, mining and nuclear – since it was developed by TWI, one of the world’s foremost, independent, research and technology organisations – with the support of NYSEARCH, a collaborative RD & D sub-organisation of the Northeast Gas Association.

[+]
Photograph shows PolyTest™ system onsite inspection of a butt fusion joint in service.

PolyTest™ is supported by procedures to enable detection of all types of flaw that can occur in PE pipe joints, including planar flaws, particulate contamination and cold fusions. It is backed up by extensive performance testing to determine the acceptance criteria that should be applied.

The self-contained system is fully portable allowing in-trench inspections, and incorporates a simple scanner to accommodate pipes with outside diameters from 4-40 inches and wall thickness from 0.3-2.5 inches. It can also be adapted for pipes outside these ranges. After the joints have been inspected the system generates the results, providing a permanent record of joint integrity.

PolyTest™ complies with the requirements of ASTM E3044, ASME BPVC Section III Appendix XXVI and EN 13100-3, giving the end user increased confidence in the integrity of PE joints within their pipelines.

To enquire about the PolyTest™ service, please contact Dirk Schumann, Direct: +1-219-310-8560, Email: polytest@teamindustrialservices.com, TEAM QUALSPEC, 570 N. Indiana Ave, Crown Point, IN 46307, Web: www.teaminc.com.

For technical information about the PolyTest™ system, please contact Mike Troughton, Direct: +44 1223 899439, Email: mike.troughton@twi.co.uk, TWI Ltd, Granta Park, Cambridge CB21 6AL, United Kingdom, Web: www.twi-global.com

 
Visit: TWI Ltd (The Welding Institute)

Feedback: ()

Share:
More from "TWI Ltd (The Welding Institute)" (5 of 192)
2019-12Non-Destructive Testing of Hybrid Composite Structures
2019-11TWI Tests Inspection Techniques at Geothermal Field Site
2019-11External Thread Crack Detection Using Eddy Current Testing
2019-11Guided Wave Testing on Pipelines in the Algerian Desert
2019-11X-RAY Inspection of Micro-Electro Mechanical Systems (MEMS)
... All 192 Details >
Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window