where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
NDT.net Issue - 2017-04 - NEWS
NDT.net Issue: 2017-04
Publication: e-Journal of Nondestructive Testing (NDT) ISSN 1435-4934 (NDT.net Journal)

Sonotron NDT announces the new release of the inspection software for the PA inspection of CRA welds with use of Dual Matrix Array (DMA) probes

Sonotron NDT76, Rehovot, Israel

The recently issued new release of the Expert DMA / Expert A DMA inspection software for the Sonotron NDT’s ISONIC series PA ultrasonic flaw detectors (ISONIC 3510, ISONIC 2010, ISONIC 2009) allows the longitudinal wave inspection of CRA welds with symmetrical / asymmetrical bevel and structure.

[+] [+]

The True-to-Geometry coverage and imaging is provided along with the sensitivity equalized within entire insonified cross-section of the material. The DMA probes carrying two matrix arrays comprising M x N elements each may be used allowing the beam steering in the cross-sectional plane along with the beam swiveling. This increases the flexibility of DMA pulsing receiving thanks to the ability of controlling the depth of the common focal point for the emitting and receiving arrays electronically for the same wedge. In such manner the signal-to-noise ratio may be optimized effectively. The control of the ultrasonic beams is illustrated by the short instrument screen video below:

The video below illustrates the detection and imaging of 2 mm dia side drilled holes (SDH) through the duplex Ni9 CRA weld jointing the cladded regular carbon and stainless steel 48 mm thick walls (cal.block)

Also the excellent performance has been demonstrated the on the samples of Ni9 CRA welds jointing the cladded carbon and stainless steel heavy thickness walls (80 mm) The related links:

Visit: Sonotron NDT

Feedback: ()

More from "Sonotron NDT" (5 of 75)
2020-08Detection and sizing of internal vertical and quasi-vertical planar defects NEWS
2020-07PAUT – Through-Paint No-Grinding Evaluation of Corrosion Blisters, Scabs, etc NEWS
2020-06PAUT – Testing Integrity NEWS
2020-05Verification of detachable and integrated wedges used with PA probes NEWS
2020-04In-Service Inspection of the Deck Plates of Metallic Bridges for Cracking above Skewed Fillets NEWS
... All 75 Details >

More Videos in NDT.net

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window