where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

NDT.net Issue - 2019-01 - NEWS
2019-01 NDT.net Journal,

Scientists to combine ultrasonic, vibration and heat for flaw detection in aviation

National Research Tomsk Polytechnic University (TPU)57, Tomsk [Russia]
NDT.net Journal
Issue: 2019-01
Composite or multicomponent materials are widespread in the aviation and automotive industry since they compete with metals in their characteristics but weigh much less. Due to this multicomponent composition, it is difficult to test the quality of such materials. Materials can contain very small hidden defects, i.e. delamination, cracks, impact damage. Their size is literally a few millimeters. The exploitation of such products, for example, in aviation, can lead to a disaster.

In the lab of the Institute of Strength Physics and Materials Science SB RAS. Credit: Vladimir Beloborodov.

Daria Derusova, JRF from the TPU Research School of High Energy Physics is developing a system combining three methods of non-destructive testing including a vibrational, resonant ultrasonic and thermal ones. This approach is of interest for aviation and automobile industries as it will make it possible to monitor the quality of complex and large-sized products made of composite materials taking into account their physical properties. The Russian Science Foundation has supported this two-year project up to 2020.

The project manager Daria Derusova says: ‘Every year, new composite materials appear and they challenge existing methods of non-destructive testing. Joints between the materials are of particular complexity and importance.’

Now classic ultrasonic and X-ray testing are used at the production.

‘The latter is the most accurate but it does not fit to large-sized objects that are presented in aviation a lot. In turn, ultrasonic facilities consume kilowatts of electricity to stimulate materials with a mono-frequency acoustic signal. Laser vibrometry in the combination with resonant stimulation of defects is seen as the most promising modern method. Such an approach allows activating local resonant vibration in the area of damage that also causes the increase of temperature in this area. In turn, an infrared camera will allow the registration of the temperature change and the addition of data about the quality of products.

As a result, we expect to build a laboratory facility to test large and complex objects by form. Meantime, it will consume several times less electricity than high-power ultrasonic installations. The developed approach will be an alternative to the existing methods of non-destructive testing in aviation and machine-building industry,’ says the early-career researcher.

The facility will comprise of such elements as resonant ultrasonic stimulation using piezoelectric transducers, a scanning laser Doppler vibrometer and an infrared camera with specialized software.

‘The essence of the system is that a tested object – material is exposed to acoustic stimulation in a wide range of frequencies. Elastic waves create vibrations of both material itself and its inhomogeneities. The resonant frequency of vibrations of defects’ walls differs from that of the object that can be detected with a scanning vibrometer. In addition, due to intense resonant vibrations defect areas are locally heated. We register these changes with an infrared camera. The data of quality testing allow us to identify a defect itself, its location, form, and size,’ clarifies Daria Derusova.

In the framework of this project, TPU scientists cooperate with peers from the Institute of Strength Physics and Materials Science SB RAS (Laboratory for Quality Testing of Materials and Structures), the University of L'Aquila (Italy) and the Symbiosis Institute of Technology (India). The S.А. Chaplygin Siberian Research Institute of Aviation (SibNIA, Novosibirsk) provides samples of materials for testing proposed technology.

Tags: Grants, Tomsk Polytechnic University, Russian Science Foundation, Non-Destructive Testing, Science composite materials,

More of National Research Tomsk Polytechnic University (TPU) published in NDT.net
2017-04-01: Thermische Chladni Klangfiguren in der zerstörungsfreien Prüfung
2017-02-01: Modeling, detecting and evaluating water ingress in aviation honeycomb panels
2016-10-01: A Novel One Sided Diffusivity Evaluation Technique Versus Parker's Method in Application to Carbon/Epoxy Composite
2016-10-01: Thermal NDT Research at Tomsk University, Russia
2016-07-01: Robot-based In-Process Examination of ITER Dome and First-Wall Panels based on Novel Ultrasonic Tomography Approach
2016-02-01: Modeling of the method to determine the Bremsstrahlung focal spot size for the accelerator
2015-07-01: Infrared Testing of CFRP Components: Comparisons of Approaches using the Tanimoto Criterion
2015-05-01: Highly-efficient and noncontact vibro-thermography via local defect resonance
2015-05-01: Ultrasonic and optical stimulation in IR thermographic NDT of impact damage in carbon composites
2014-12-01: Evaluating Building Envelope Thermal Resistance by Using Infrared Thermography
All 56 Articles & News of National Research Tomsk Polytechnic University (TPU) in NDT.net

We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
this is debug window