where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
Beta-Version of this Page View
NDT.net Issue - 2019-11 - NEWS
NDT.net Issue: 2019-11
Publication: e-Journal of Nondestructive Testing (NDT) ISSN 1435-4934 (NDT.net Journal)
NEWS

External Thread Crack Detection Using Eddy Current Testing

TWI Ltd (The Welding Institute)190, Great Abington, Cambridge, United Kingdom

A long-term client asked TWI to inspect the external threads on a composite valve block body (CVB) in order to detect any potential cracks in the component. Non-destructive testing methods, eddy current testing (ECT) and alternating current potential drop (ACPD) were used. The TWI team carried out the inspection on-site in Agotnes, Norway.

Overview

TWI has a long-term relationship with the client, who operates in the sub-sea industry, having previously inspected a range of different connectors. This is an on-going project with further plans to inspect more connectors in the future.

Objectives

The project’s aim thus far was to inspect and detect any cracks in the external threads on the CVB. This was to be achieved by using ECT to detect the cracks, followed by application of the ACPD method to measure the approximate depth of any cracks.

The component with marked sections 1-12
Figure 1: The component with marked sections 1-12

Solution

An eddy current flaw detector thread probe was used to scan the external thread. To begin with, the sensitivity and phase were adjusted on a calibration specimen to ensure accuracy. Then the phase angle was adjusted to give a horizontal lift-off vector. Finally, the gain was added to achieve the full-screen height. The same section of the thread was used to calibrate the ACPD equipment which was then used to measure the depth of a crack in either the root or flank of the threads.

The inspection was carried out by dividing the circumference of the component into 12 sections, then checking the response from the 0.2mm notch in the calibration specimen, after which the probe was placed inside the threads and component. Subsequently, the probe was placed and balanced in the thread of the component. To ensure full coverage, each thread in each section was scanned separately in turn, and overlapping with the next section.

Outcomes

No deposits were visible on the inspected composite valve block body and the threads were in good surface condition.

The ECT inspection of the thread was successful as it detected several indications, two of which were below the reportable level. However, due to the eddy current noise and unideal contact between the eddy current probe and the thread, it was recommended that the client consider using a magnetic particle inspection for the next stage of the project.

The threads showing good condition
Figure 2: The threads showing good condition

 
Visit: TWI Ltd (The Welding Institute)

Feedback: ()

Share:
More from "TWI Ltd (The Welding Institute)" (5 of 191)
2019-11TWI Tests Inspection Techniques at Geothermal Field Site
2019-11Guided Wave Testing on Pipelines in the Algerian Desert
2019-11X-RAY Inspection of Micro-Electro Mechanical Systems (MEMS)
2019-10Artificial Intelligence Approaches as Tools for Auditing and Improving Data Analysis of Advanced Ultrasound Techniques in Non-Destructive Testing
2019-09Experts to attend Materials Testing Exhibition in Telford
... All 191 Details >
Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window