where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

"University of Stuttgart" Search Results: 265
Title / Author(s) / Keywords PublicationDate
2019-03 iCT 2019, New Methods & Optimization
Wed 13:50 Auditorium
Spatial Resolution Enhancement Based on Detector Displacement for Computed Tomography
K. Sun2, S. Kieß8, S. Simon9
Institute for Parallel and Distributed Systems; University of Stuttgart269, Stuttgart [Germany]
Spatial Resolution, Detector Displacement, Multi-GPU Acceleration

 
iCT 2019
Session: New Methods & Optimization
Wed 13:50 Auditorium
2019-03
2018-12 SHM-NDT 2018, Composites
A Concept of Multi-Resolution Modal Teager-Kaiser Energy for Crack Detection in Composite Laminates
W. Xu14, M. Cao16, I. Solodov245, T. Liu12, Y. Xu1
1Dep. of Engineering Mechanics; Hohai University 14, Nanjing [China]
2Institute for Polymer Technology (IKT); University of Stuttgart269, Stuttgart [Germany]
composite laminate, crack detection, mode shape, wavelet transform, Teager-Kaiser energy operator, laser scanning vibrometer

 
SHM-NDT 2018
Session: Composites
2018-12
2018-12 SHM-NDT 2018, Structural Health Monitoring
Real-time recognition of time-varying tension from dynamic response by synchrosqueezing technique for prestressed cable-supported bridges
X. Zhang13, M. Cao16, I. Solodov245, Y. Zhang3, J. Peng119, W. Xu14
1aBeijing Institute of Technology bNDT research center; Hohai University 14, Nanjing [China]
2Institute for Polymer Technology (IKT); University of Stuttgart269, Stuttgart [Germany]
3Jiangsu Transportation Research Institute Co Ltd, Nanjing [China]
time-varying cable tension, synchro-squeezing Fourier transform, instantaneous frequency, single sensor, low sampling frequency

 
SHM-NDT 2018
Session: Structural Health Monitoring
2018-12
2018-11 EWSHM 2018, Novel Techniques
Resonant Air-Coupled Emission (RACE): A new approach to structural health monitoring of composite structures
I. Solodov45, M. Kreutzbruck126
Institute for Polymer Technology (IKT); University of Stuttgart269, Stuttgart [Germany]
Aerospace, Defects, Novel Techniques, Ultrasonics

 
EWSHM 2018
Session: Novel Techniques
2018-11
2018-10 ZfP-Zeitung, Novel Techniques
Einsatz der Laser-Thermografie für die bildgebende Schichtdickenmessung
M. Kreutzbruck126, M. Rahammer21
Institute for Polymer Technology (IKT); University of Stuttgart269, Stuttgart [Germany]

 DE  
ZfP-Zeitung
2018-10
2018-09 DGZfP 2018, Algorithmen / Simulation I
Einfluss unterschiedlicher Schadensparameter auf die Lokale Defektresonanz
M. Rahammer21, M. Kreutzbruck126
Institute for Polymer Technology (IKT); University of Stuttgart269, Stuttgart [Germany]

 DE  
DGZfP 2018
Session: Algorithmen / Simulation I
2018-09
2018-09 DGZfP 2018, Algorithmen / Simulation II
Effiziente CT-Rekonstruktion eines Voxel-Volumens mit inhomogener räumlicher Auflösung mithilfe eines Octrees
B. Betz12, S. Kieß18, M. Krumm223, G. Knupe22, T. Eshete22, S. Simon19
1Institute for Parallel and Distributed Systems; University of Stuttgart269, Stuttgart [Germany]
2RayScan Technologies GmbH13, Meersburg [Germany]

 DE  
DGZfP 2018
Session: Algorithmen / Simulation II
2018-09
2018-09 DGZfP 2018, Computertomographie
Bestimmung der Faserorientierung langglasfaserverstärkter Thermoplaste mittels bildoptischer Analyse und Computertomografie
F. Willems13, A. Beerlink2, J. METAYER2, M. Kreutzbruck1126, C. Bonten13
1Institute for Polymer Technology (IKT); University of Stuttgart269, Stuttgart [Germany]
2YXLON International GmbH184, Hamburg [Germany]
Radiographic Testing (RT), Visual and Optical Testing (VT/OT), materials characterization, Anisotropy, comparative study, mechanical properties, fiber orientation, computer tomography, fiber length, Injection Molding, fiber concentration, fiber microstructure, cross section analysis, long fiber reinforced plastics

 DE  
DGZfP 2018
Session: Computertomographie
2018-09
2018-09 DGZfP 2018, Faserkunststoffverbunde
Untersuchung des Einflusses von Artefakten auf das Prüfergebnis des robotergestützten Wirbelstromverfahrens an CFK-Bauteilen
S. Joas5, J. Rittmann4, H. Vu, M. Kreutzbruck126
Institute for Polymer Technology (IKT); University of Stuttgart269, Stuttgart [Germany]

 DE  
DGZfP 2018
Session: Faserkunststoffverbunde
2018-09
2018-09 DGZfP 2018, Klebeverbindungen
Evaluation of bonding quality in CFRP composite laminates by measurements of local vibration nonlinearity
I. Solodov145, D. Segur28, M. Kreutzbruck1,1126
1Institute for Polymer Technology (IKT); University of Stuttgart269, Stuttgart [Germany]
2LIST; CEA , Toulouse [France]

 
DGZfP 2018
Session: Klebeverbindungen
2018-09
2018-09 DGZfP 2018, Klebeverbindungen
Schnelle Prüfung von CFK-Tragflächen Vorderkanten mit Phased Array Ultraschall
Y. Bernhardt3, W. Essig8, M. Kreutzbruck126
Institute for Polymer Technology (IKT); University of Stuttgart269, Stuttgart [Germany]

 DE  
DGZfP 2018
Session: Klebeverbindungen
2018-09
2018-09 DGZfP 2018, Luftfahrt
Prüfung von dicken CFK Bauteilen mit der Total Focussing Methode
Y. Bernhardt3, J. Rittmann4, W. Essig8, M. Kreutzbruck126
Institute for Polymer Technology (IKT); University of Stuttgart269, Stuttgart [Germany]

 DE  
DGZfP 2018
Session: Luftfahrt
2018-09
2018-09 DGZfP 2018, Luftultraschall
Entwicklung eines Vorlauftrichters zur Fokussierung von Luftultraschallprüfköpfen
W. Essig8, J. Rittmann4, M. Kreutzbruck126
Institute for Polymer Technology (IKT); University of Stuttgart269, Stuttgart [Germany]

 DE  
DGZfP 2018
Session: Luftultraschall
2018-09
2018-09 DGZfP 2018, Metallische Komponenten
Nutzung zerstörungsfreier Prüfverfahren zur mikrostrukturbasierten Restlebensdauerbewertung alternder metallischer Werkstoffe und Komponenten in der Energietechnik
R. Acosta1, P. Starke110, C. Boller177, M. Jamrozy2, M. Klein22, M. Knyazeva2, F. Walther25, K. Heckmann3, J. Sievers3, T. Schopf4, X. Schuler44
1Materials Science, LZfPQ; Saarland University72, Saarbrücken [Germany]
2aFachgebiet Werkstoffprüftechnik (WPT) bChair of Materials Test Engineering (WPT); Technical University of Dortmund (TU Dortmund) 37, Dortmund [Germany]
3Gesellschaft für Anlagen- und Reaktorsicherheit (GRS) mbH, Köln [Germany]
4Materialprüfungsanstalt (MPA); University of Stuttgart269, Stuttgart [Germany]

 DE  
DGZfP 2018
Session: Metallische Komponenten
2018-09
2018-09 DGZfP 2018, Ultraschall Phased Array Technik
Ultraschalluntersuchungen an Rissfeldern in großen Schmiedekomponenten
A. Jüngert14, C. Swacek, P. Gauder, X. Schuler4
aMaterialprüfungsanstalt (MPA) bIMWF; University of Stuttgart269, Stuttgart [Germany]

 DE  
DGZfP 2018
Session: Ultraschall Phased Array Technik
2018-09
2018-09 DGZfP 2018, Zuverlässigkeit von ZfP-Verfahren
Resonante Frequenzsweep Thermografie für Flachbodenbohrungen und Impactschäden
M. Rahammer21, M. Kreutzbruck126
Institute for Polymer Technology (IKT); University of Stuttgart269, Stuttgart [Germany]

 DE  
DGZfP 2018
Session: Zuverlässigkeit von ZfP-Verfahren
2018-09
2018-08 ECNDT 2018, Composite Material - UT
Resonant acoustic response of damage for highly-efficient NDT and diagnostic imaging in composite materials
I. Solodov45
Institute for Polymer Technology (IKT-ZfP); University of Stuttgart269, Stuttgart [Germany]
Composite materials, Ultrasonics, Vibration analysis and testing

 
ECNDT 2018
Session: Composite Material - UT
2018-08
2018-08 ECNDT 2018, Composite Material - UT
The Local Defect Resonance of Elliptically Shaped Defects
M. Rahammer21, S. Joas5, M. Kreutzbruck126
Institute for Polymer Technology (IKT); University of Stuttgart269, Stuttgart [Germany]
Composite materials, Impact, Theoretical Modelling, Vibration analysis and testing

 
ECNDT 2018
Session: Composite Material - UT
2018-08
2018-08 ECNDT 2018, Mathematical Modelling - UT
Probability of Detection Analysis of Air-borne UT-Inspection of Thermoplastic CFRP Tapes
W. Essig8, J. Rittmann4, M. Kreutzbruck126
Institute for Polymer Technology (IKT); University of Stuttgart269, Stuttgart [Germany]
Air-coupled ultrasound, Composite materials, Data processing, Quality control

 
ECNDT 2018
Session: Mathematical Modelling - UT
2018-08
2018-08 ECNDT 2018, Nonlinear Ultrasonics
Evaluation of bonding quality in CFRP composite laminates by measurements of local vibration nonlinearity
I. Solodov145, D. Segur28, M. Kreutzbruck1126
1Institute for Polymer Technology (IKT); University of Stuttgart269, Stuttgart [Germany]
2LIST; Commissariat Energie Atomique (CEA)287, Gif-Sur-Yvette [France]
Adhesives and Bonding, Composite materials, Ultrasonics

 
ECNDT 2018
Session: Nonlinear Ultrasonics
2018-08
 
Page:
 -1-   2   3   4   5   6   7   8   9   10   11   12   13   14 
next pageNext
Actual Cooperations
Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window