where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
"Upper Austrian University of Applied Sciences (FH OÖ)" Search Results: 166
Title / Author(s) / Keywords PublicationDate
2019-11 DIR 2019 CT & Multi-angle Radiography
Multimodal Transfer Functions for Talbot-Lau Grating Interferometry Data
L. Da Cunha Melo12, B. Fröhler26, C. Heinzl238, J. Kastner2120, J. Weissenböck211
1Vienna University of Technolog (TU)57, Vienna, Austria
2Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
Other Methods, Computed Tomography, Talbot-Lau Grating Interferometry

DIR 2019
Session: CT & Multi-angle Radiography
2019-11
2019-11 DIR 2019 Defect Detection & Localisation
At-line X-ray computed tomography of serial parts optimized by numerical simulations
M. Reiter125, C. Gusenbauer232, R. Huemer2, J. Kastner1120
1Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
2Nemak Linz GmbH2, Linz, Austria

DIR 2019
Session: Defect Detection & Localisation
2019-11
2019-11 DIR 2019 Multi-techniques Fusion
Multiscale and Multimodal Approaches for Three-dimensional Materials Characterisation of Fibre Reinforced Polymers by Means of X-ray based NDT Methods
B. Plank147, M. Schiwarth1, S. Senck121, J. Herr1, J. Kastner1120, S. Ayalur Karunakaran22
1Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
2Fischer Advanced Composite Components (FACC)15, Ried, Austria

DIR 2019
Session: Multi-techniques Fusion
2019-11
2019-11 DIR 2019 Poster
Damage characterisation of short glass fibre reinforced polyamide with different fibre content by an interrupted in-situ X-Ray computed tomography test
J. Maurer2, C. Hannesschläger5, B. Plank47, J. Kastner120
Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria

DIR 2019
Session: Poster
2019-11
2019-11 DIR 2019 Radiation Techniques
Improved Visualization of Polymer Foams using Talbot-Lau Grating Interferometry to Reduce Metal Artifacts
J. Glinz5, S. Senck21, M. Reiter25, A. Schrempf2, D. Fürst2, J. Kastner120
Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria

DIR 2019
Session: Radiation Techniques
2019-11
2019-08 DGZfP 2019 Verbundwerkstoffe / Faserkunststoffverbunde
Charakterisierung der Mikrostruktur spritzgegossener faserverstärkter Thermoplaste mit Hilfe von hochauflösender Röntgen-Computertomografie
J. Maurer12, D. Salaberger238, M. Jerabek23, J. Kastner1120
1Research Group Computed Tomography; Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
2Reserach group computed tomography; Borealis Polyolefine GmbH5, Linz, Austria

DE
DGZfP 2019
Session: Verbundwerkstoffe / Faserkunststoffverbunde
2019-08
2019-05 QIRT 2018 Grinzato Award
Blind structured illumination as excitation for super-resolution photothermal radiometry
P. Burgholzer116, T. Berer15, M. Ziegler218, E. Thiel24, S. Ahmadi22, J. Gruber38, G. Mayr320, G. Hendorfer319
1Research Center for NDT GmbH (RECENDT)13, Linz, Austria
2BAM Federal Institute for Materials Research and Testing1304, Berlin, Germany
3Josef Ressel Centre for Thermal NDE of Composites; Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
Infrared Testing (IRT), reconstruction, thermography, super resolution, sparse regularization

QIRT 2018
Session: Grinzato Award
2019-05
2019-05 QIRT 2018 Material Properties
Thermal Effusivity Determination of Carbon Fibre Reinforced Polymers by means of Active Thermography
J. Suchan3, G. Hendorfer19
Josef Ressel Centre for Thermal NDE of Composites; Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
Infraread Testing (IRT)

QIRT 2018
Session: Material Properties
2019-05
2019-03 iCT 2019 Algorithms & Reconstruction
Wed 16:20 Auditorium
An Interactive Visual Comparison Tool for 3D Volume Datasets represented by Nonlinearly Scaled 1D Line Plots through Space-filling Curves
J. Weissenböck111, B. Fröhler16, E. Gröller211, J. Sanctorum33, J. De Beenhouwer315, J. Sijbers318, S. Ayalur Karunakaran42, H. Hoeller42, J. Kastner1120, C. Heinzl138
1Research Group Computed Tomography; Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
2Institute of Computer Graphics and Algorithms; Vienna University of Technolog (TU)57, Vienna, Austria
3aInstitute of Computer Graphics and Algorithms bimec-VisionLab, Department of Physics; University of Antwerpen34, Antwerpen, Belgium
4Fischer Advanced Composite Components (FACC)15, Ried, Austria
Radiographic Testing (RT), Other Methods, X-ray computed tomography, visual analysis, comparative visualization, Hilbert curve, nonlinear scaling

iCT 2019
Session: Algorithms & Reconstruction
Wed 16:20 Auditorium
2019-03
2019-03 iCT 2019 Metrology & Manufacturing
Thu 10:50 Auditorium
Experimental investigation on the accuracy of XCT measurement of fiber length in fiber reinforced polymers
F. Zanini14, G. Gerardi1, J. Weissenböck211, C. Heinzl238, J. Kastner2120, S. Carmignato117
1University of Padova (UNIPD)32, Padova, Italy
2Research Group Computed Tomography; Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
X-ray computed tomography, fiber length measurement, fiber reinforced polymers, accuracy evaluation

iCT 2019
Session: Metrology & Manufacturing
Thu 10:50 Auditorium
2019-03
2019-03 iCT 2019 NDT, Materials & Manufacturing
Fri 13:50 Auditorium
Characterisation of fiber lay-up and defects in CFRP using Talbot-Lau grating interferometry
S. Senck121, M. Scheerer27, B. Plank147, C. Hannesschlaeger1, J. Kastner1120
1Research Group Computed Tomography; Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
2Aerospace & Advanced Composites GmbH (AAC)5, Wiener Neustadt, Austria
Talbot-Lau grating interferometer, phase contrast imaging, microcomputed tomography, carbon fibre-reinforced polymers, fiber lay-up, defects

iCT 2019
Session: NDT, Materials & Manufacturing
Fri 13:50 Auditorium
2019-03
2019-03 iCT 2019 New Methods & Optimization
Wed 13:50 Auditorium
Simulated grating-based x-ray phase contrast images of CFRP-like objects
J. Sanctorum13, J. De Beenhouwer115, J. Weissenböck211, C. Heinzl238, J. Kastner2120, J. Sijbers118
1imec-VisionLab, Department of Physics; University of Antwerpen34, Antwerpen, Belgium
2Research Group Computed Tomography; Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
Radiographic Testing (RT), Other Methods, Simulation, Phase contrast, Carbon Fibre Reinforced Polymer, GATE

iCT 2019
Session: New Methods & Optimization
Wed 13:50 Auditorium
2019-03
2019-03 iCT 2019 Poster exhibition
Thu 16:00 Agora
Porosity determination in additively manufactured Ti parts using X-ray tomography
J. Glinz5, M. Reiter25, T. Gastinger2, A. Huskic2, B. Plank47, J. Kastner120, S. Senck21
Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
X-ray micro-computed tomography, Additive manufacturing, Titanium alloys, Porosity determination, Microstructure

iCT 2019
Session: Poster exhibition
Thu 16:00 Agora
2019-03
2019-03 iCT 2019 Short talks
Thu 13:50 Auditorium
Tools for the Analysis of Datasets from X-Ray Computed Tomography based on Talbot-Lau Grating Interferometry
B. Fröhler16, L. Da Cunha Melo22, J. Weissenböck111, J. Kastner1120, T. Möller32, H. Hege4, E. Gröller211, J. Sanctorum53, J. De Beenhouwer515, J. Sijbers518, C. Heinzl138
1Research Group Computed Tomography; Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
2VRVis Research Center; Vienna University of Technolog (TU)57, Vienna, Austria
3Faculty of Computer Science; University of Vienna4, Vienna, Austria
4Konrad-Zuse-Institut Berlin (ZIB)19, Berlin, Germany
5University of Antwerpen34, Antwerpen, Belgium
Radiographic Testing (RT), Other Methods, image fusion, multimodal data, transfer function design, image segmentation uncertainty

iCT 2019
Session: Short talks
Thu 13:50 Auditorium
2019-03
2019-02 NDT Review Journal of Nondestructive Evaluation (Springer)
Parametric Reconstruction of Glass Fiber-reinforced Polymer Composites from X-ray Projection Data—A Simulation Study
T. Elberfeld1, J. De Beenhouwer115, A. Dekker1, C. Heinzl238, J. Sijbers118
1imec-VisionLab, Department of Physics; University of Antwerpen34, Antwerpen, Belgium
2elweg 2, 2628 CD Delft, The Netherlands 3 Research Group X-Ray Computed Tomography; Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
μCT, Materials science, Glass fiber reinforced polymer, GFRP, Parametric model, Tomography Modeling of micro-structures

NDT Review
Session: Journal of Nondestructive Evaluation (Springer)
2019-02
2019-02 NDT Review Journal of Nondestructive Evaluation (Springer)
Porosity Determination of Carbon and Glass Fibre Reinforced Polymers Using Phase-Contrast Imaging
C. Gusenbauer32, M. Reiter25, B. Plank47, D. Salaberger38, S. Senck21, J. Kastner120
aSchool of Engineering bR&D Competence Center cSchool of Engineering and Environmental Sciences cReserach group computed tomography cResearch Group Computed Tomography; Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
X-ray computed tomography, Talbot-Lau grating interferometer, Differential phase contrast, Carbon and glass fibre reinforced polymers, Porosity

NDT Review
Session: Journal of Nondestructive Evaluation (Springer)
2019-02
2019-02 NDT Review Journal of Nondestructive Evaluation (Springer)
Case Study of Empirical Beam Hardening Correction Methods for Dimensional X-ray Computed Tomography Using a Dedicated Multi-material Reference Standard
M. Reiter125, F. De Oliveira22, M. Bartscher233, C. Gusenbauer132, J. Kastner1,1120
1aR&D Competence Center bSchool of Engineering cResearch Group Computed Tomography; Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
2Physikalisch-Technische Bundesanstalt (PTB)44, Braunschweig, Germany
Industrial computed tomography, Dimensional metrology, Multi-material measurements, Beam hardening correction, Material influence

NDT Review
Session: Journal of Nondestructive Evaluation (Springer)
2019-02
2018-08 ECNDT 2018 CT-Applications
Porosity Determination in CFRP by means of X-ray Computed Tomography Methods
B. Plank147, C. Gusenbauer132, S. Senck121, H. Hoeller22, J. Kastner1,1120
1Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
2Fischer Advanced Composite Components (FACC)15, Ried, Austria
Composite materials, Defects, Tomography

ECNDT 2018
Session: CT-Applications
2018-08
2018-08 ECNDT 2018 CT-Applications
High-resolution X-ray computed tomography of inhomogeneous materials
C. Gusenbauer32, M. Reiter25, D. Salaberger38, B. Plank47, J. Kastner120
aSchool of Engineering bR&D Competence Center cReserach group computed tomography cSchool of Engineering and Environmental Sciences; Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
Tomography

ECNDT 2018
Session: CT-Applications
2018-08
2018-08 ECNDT 2018 CT-Applications
Determination of pore size distribution and finite element analysis of additively manufactured Ti pedicle screws using X-ray microcomputed tomography
J. Glinz5, P. Weissenbacher, S. Senck21, A. Schrempf2, D. Fürst2, T. Gastinger2, A. Huskic2, T. Reiter2, J. Kastner120
Research Group for Surgical Simulators; Upper Austrian University of Applied Sciences (FH OÖ)166, Wels, Austria
Defects, Image processing, Medical and related NDT, Tomography

ECNDT 2018
Session: CT-Applications
2018-08
 
Page:
 -1-   2   3   4   5   6   7   8   9 
next pageNext
Actual Cooperations
Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window