where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -

"Vienna University of Technolog (TU)" Search Results: 55

Languages
English (62)
German (23)

Title / Author(s) / Keywords PublicationDate
2019-03 iCT 2019, Algorithms & Reconstruction
Wed 16:20 Auditorium
An Interactive Visual Comparison Tool for 3D Volume Datasets represented by Nonlinearly Scaled 1D Line Plots through Space-filling Curves
J. Weissenböck110, B. Fröhler15, E. Gröller211, J. Sanctorum34, J. De Beenhouwer315, J. Sijbers319, S. Ayalur karunakaran4, H. Hoeller42, J. Kastner1114, C. Heinzl137
1Research Group Computed Tomography; Upper Austrian University of Applied Sciences (FH OÖ)158, Wels [Austria]
2Institute of Computer Graphics and Algorithms; Vienna University of Technolog (TU)55, Vienna [Austria]
3aInstitute of Computer Graphics and Algorithms bimec-VisionLab, Department of Physics; University of Antwerpen32, Antwerpen [Belgium]
4Fischer Advanced Composite Components (FACC)14, Ried [Austria]
Comparative visualization, visual analysis, Hilbert curve, nonlinear scaling, X-ray computed tomography

 
iCT 2019
Session: Algorithms & Reconstruction
Wed 16:20 Auditorium
2019-03
2019-03 iCT 2019, Non-Destructive Testing
Fri 09:00 Auditorium
A Novel Approach for Immediate, Interactive CT Data Visualization and Evaluation using GPU-based Segmentation and Visual Analysis
H. Steinlechner1, G. Haaser1, B. Oberdorfer22, D. Habe29, S. Maierhofer1, M. Schwärzler1, E. Gröller311
1VRVis Research Center for Virtual Reality and Visualization Ltd5, Vienna [Austria]
2Austrian Foundry Research Institute13, Leoben [Austria]
3Vienna University of Technolog (TU)55, Vienna [Austria]
CT, GPU, Inclusion Detection, Interactive Visualisation, Visual Analysis, Parallel Coordinates, Volume Rendering

 
iCT 2019
Session: Non-Destructive Testing
Fri 09:00 Auditorium
2019-03
2019-03 iCT 2019, Short talks
Thu 13:50 Auditorium
Tools for the Analysis of Datasets from X-Ray Computed Tomography based on Talbot-Lau Grating Interferometry
B. Fröhler15, L. Da Cunha Melo2, J. Weissenböck110, J. Kastner1114, T. Möller32, H. Hege4, E. Gröller211, J. Sanctorum54, J. De Beenhouwer515, J. Sijbers519, C. Heinzl137
1Research Group Computed Tomography; Upper Austrian University of Applied Sciences (FH OÖ)158, Wels [Austria]
2VRVis Research Center; Vienna University of Technolog (TU)55, Vienna [Austria]
3Faculty of Computer Science; University of Vienna4, Vienna [Austria]
4Konrad-Zuse-Institut Berlin (ZIB)18, Berlin [Germany]
5University of Antwerpen32, Antwerpen [Belgium]
multimodal data, image fusion, transfer function design, image segmentation uncertainty

 
iCT 2019
Session: Short talks
Thu 13:50 Auditorium
2019-03
2018-02 iCT 2018, Short talks
Comparative Visualization of Orientation Tensors in Fiber-Reinforced Polymers
J. Weissenböck110, M. Arikan14, D. Salaberger137, J. Kastner1114, J. De Beenhouwer215, J. Sijbers219, S. Rauchenzauner32, T. Raab-Wernig4, E. Gröller511, C. Heinzl1,137
1Upper Austrian University of Applied Sciences (FH OÖ)158, Wels [Austria]
2imec-VisionLab; University of Antwerpen32, Antwerpen [Belgium]
3Fischer Advanced Composite Components (FACC)14, Ried [Austria]
4ZKW Group GmbH, Wieselburg [Austria]
5Vienna University of Technolog (TU)55, Vienna [Austria]
X-ray computed tomography, fiber-reinforced polymers, comparative visualization, tensor visualization, glyphs

 
iCT 2018
Session: Short talks
2018-02
2017-03 iCT 2017, New Methods & Optimization
Comparison of Final Fracture Extraction Techniques for Interrupted In situ Tensile Tests of Glass Fiber Reinforced Polymers
A. Amirkhanov12, D. Salaberger137, J. Kastner1114, C. Heinzl137, E. Gröller211
1Upper Austrian University of Applied Sciences (FH OÖ)158, Wels [Austria]
2Vienna University of Technolog (TU)55, Vienna [Austria]
composite, polymers, materials characterization, porosity, Computed Tomography, crack detection, interrupted in situ tensile tests, final fracture extraction, feature extraction

 
iCT 2017
Session: New Methods & Optimization
2017-03
2016-04 DGZfP 2015, Materialcharakterisierung
Einsatzmöglichkeiten von CT in der Stahlforschung
C. Gusenbauer131, S. Großeiber23, B. Harrer313, B. Plank145, G. Klösch4, W. Schützenhöfer5, S. Ilie64, G. Requena211, J. Kastner1114
1aR&D Competence Center bSchool of Engineering and Environmental Sciences; Upper Austrian University of Applied Sciences (FH OÖ)158, Wels [Austria]
2Institute of Materials Science and Technology; Vienna University of Technolog (TU)55, Vienna [Austria]
3voestalpine Stahl3, Linz [Austria]
4voestalpine Stahl Donawitz GmbH2, Leoben [Austria]
5Böhler Edelstahl GmbH 11, Kapfenberg [Austria]
6voestalpine Stahl GmbH6, Linz [Austria]

 DE  
DGZfP 2015
Session: Materialcharakterisierung
2016-04
2016-04 DGZfP 2015, Normen und Regelwerke
Die neue Revision 4 der CCH 70 (Cahier des Charges des Hydrauliques); Pflichtenheft für die Abnahme von Stahlgussstücken für hydraulische Maschinen
W. Auer2
Technische Versuchs- & Forschungsanstalt GmbH (TVFA); Vienna University of Technolog (TU)55, Vienna [Austria]

 DE  
DGZfP 2015
Session: Normen und Regelwerke
2016-04
2016-02 iCT 2016, Materials characterisation
3D microstructure and damage accumulation in a cast AlSi12Cu5Ni2-Mg piston alloy as a function of solution treatment
K. Bugelnig1, G. Requena211, F. Sket32, F. Wilde43
1Inst. of Materials Science & Technology; Vienna University of Technolog (TU)55, Vienna [Austria]
2German Aerospace Center (DLR)7, Cologne [Germany]
3Madrid Institute for Advanced Studies of Materials (IMDEA Materials Institute)4, Madrid [Spain]
4Helmholtz-Zentrum Geesthacht6, Geesthacht [Germany]
Other Methods, Synchrotron Tomography, Damage evolution, Al-Si piston alloys, solution treatment, 3D microstructure

 
iCT 2016
Session: Materials characterisation
2016-02
2015-04 EWGAE 2014, Signal Detection and Processing
Application of X22-Correlation to Some Types of Acoustic Emission Signals
F. Rauscher12
Institute for Engineering Design and Logistics Engineering; Vienna University of Technolog (TU)55, Vienna [Austria]
 
EWGAE 2014
Session: Signal Detection and Processing
2015-04
2014-12 ECNDT 2014, Materials Characterization - Metals
3D-microstructure characterization of thermomecanically treated Mg-alloys by high resolution X-ray computed tomography
J. Kastner1114, S. Zaunschirm1, G. Requena211, S. Baumgartner1, H. Pinto3, G. Garces43
1R&D Competence Center; Upper Austrian University of Applied Sciences (FH OÖ)158, Wels [Austria]
2Inst. of Materials Science & Technology; Vienna University of Technolog (TU)55, Vienna [Austria]
3School of Engineering of Sao Carlos; University of Sao Paulo (USP), Sao Carlos [Brazil]
4Department of Physical Metallurgy; National Center for Metallurgical Research (CENIM-CSIC)3, Madrid [Spain]
computed tomography (CT), materials characterization, x-ray computed tomography, Mg-alloys, micro-structure characterization

 
ECNDT 2014
Session: Materials Characterization - Metals
2014-12
2014-06 iCT 2014, Dimensional Measurement
Uncertainty in CT Metrology: Visualizations for Exploration and Analysis of Geometric Tolerances
A. Amirkhanov13, B. Fröhler15, M. Reiter123, J. Kastner1114, M. Grӧller2, C. Heinzl137
1R&D Competence Center; Upper Austrian University of Applied Sciences (FH OÖ)158, Wels [Austria]
2Institute of Computer Graphics and Algorithms; Vienna University of Technolog (TU)55, Vienna [Austria]
Industrial 3D computed tomography, uncertainty visualization, level-of-details, metrology

 
iCT 2014
Session: Dimensional Measurement
2014-06
2014-06 iCT 2014, Materials Characterisation and Special Applications Bio-Based Structures and Materials
CT Image Acquisition for Implant Modeling in Bone Biomechanics
T. Gross1, C. Gusenbauer231, A. Synek1, D. Pahr1
1Institute of Lightweight Design and Structural Biomechanics; Vienna University of Technolog (TU)55, Vienna [Austria]
2R&D Competence Center; Upper Austrian University of Applied Sciences (FH OÖ)158, Wels [Austria]
micro computed tomography, bone, implant, biomechanics, finite element method

 
iCT 2014
Session: Materials Characterisation and Special Applications Bio-Bas...
2014-06
2014-06 iCT 2014, Non-destructive Testing and 3D Materials Characterisation of Metallic Materials
Damage Initiation During Hot Deformation of a Continuously Cast Steel
S. Großeiber13, C. Gusenbauer231, S. Ilie34, E. Kozeschnik12, G. Requena111
1Institute of Materials Science and Technology; Vienna University of Technolog (TU)55, Vienna [Austria]
2Research and Development GmbH; Upper Austrian University of Applied Sciences (FH OÖ)158, Wels [Austria]
3voestalpine Stahl GmbH6, Linz [Austria]

 
iCT 2014
Session: Non-destructive Testing and 3D Materials Characterisation of...
2014-06
2014-06 iCT 2014, Non-destructive Testing and 3D Materials Characterisation of Metallic Materials
3D-Characterization of AlCu5Mg0.3Mn0.3 and AlCu7Mn04 Alloys
R. Gutiérrez1, G. Requena111, B. Stauder2
1Inst. of Materials Science & Technology; Vienna University of Technolog (TU)55, Vienna [Austria]
2Nemak Linz GmbH, Linz [Austria]
cast Al-Cu alloys, damage evolution, damage mechanisms, synchrotron tomography

 
iCT 2014
Session: Non-destructive Testing and 3D Materials Characterisation of...
2014-06
2014-06 iCT 2014, Special Applications
Multiscale Tomography as a Tool for Stress Measurement and Damage Characterization in a Cylinder Head Component
M. Schöbel1, T. Cavadini2, G. Baumgartner1, J. Jonke2, G. Requena211, C. Gusenbauer331
1aForschungs-Neutronenquelle Heinz Maier-Leibnitz (FRM II), b3Umformtechnik und Gießereiwesen; Technische Universität München2, Freising [Germany]
2aInstitute of Materials Science and Technology bInst. of Materials Science & Technology; Vienna University of Technolog (TU)55, Vienna [Austria]
3R&D Competence Center; Upper Austrian University of Applied Sciences (FH OÖ)158, Wels [Austria]
 
iCT 2014
Session: Special Applications
2014-06
2014-03 Journal-AE, Volume 18, 2000
Optimisation of acquisition parameters for acoustic emission measurements on small pressure vessels
F. Rauscher12
Institute for Engineering Design and Logistics Engineering; Vienna University of Technolog (TU)55, Vienna [Austria]
 
Journal-AE
Session: Volume 18, 2000
2014-03
2014-03 Journal-AE, Volume 18, 2000
Acoustic emission due to cyclic pressurisation of vessels with partially penetrated longitudinal seams
M. Bayray3
Department of Mechanical Engineering; Vienna University of Technolog (TU)55, Vienna [Austria]
 
Journal-AE
Session: Volume 18, 2000
2014-03
2013-07 EWGAE 2008, Volume 18, 2000
Laboratory experiments for assessing the detectability of specific defects by acoustic emission testing
F. Rauscher12
Institute for Engineering Design and Logistics Engineering; Vienna University of Technolog (TU)55, Vienna [Austria]
Acoustic Emission (AE), pressure vessel, In-Service Inspection, detectability, experiments

 
EWGAE 2008
2013-07
2013-05 DGZfP 2012, Ausbildung, Akkreditierung, Zertifizierung
Qualitätssicherung bei der Herstellung von Wasserkraftanlagenkomponenten Gestern - Heute - Morgen
W. Auer2
Technische Versuchs- & Forschungsanstalt GmbH (TVFA); Vienna University of Technolog (TU)55, Vienna [Austria]
NDT-wide, Magnetic Testing (MT), Penetrant Testing (PT), Ultrasonic Testing (UT), Visual and Optical Testing (VT/OT), Qualitätssicherung, Akkreditierung, Wasserkraft
 DE  
DGZfP 2012
Session: Ausbildung, Akkreditierung, Zertifizierung
2013-05
2013-05 DGZfP 2012, Ultraschallprüfung (UT)
Absicherung zulässiger Fehlergrößen mit bruchmechanischen Methoden
R. Huber
Technische Versuchs- & Forschungsanstalt GmbH (TVFA); Vienna University of Technolog (TU)55, Vienna [Austria]
 DE  
DGZfP 2012
Session: Ultraschallprüfung (UT)
2013-05
 
Page:
 -1-   2   3 
next pageNext
Actual Cooperations
Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window