where expertise comes together - since 1996 -

The Largest Open Access Portal of Nondestructive Testing (NDT)

Conference Proceedings, Articles, News, Exhibition, Forum, Network and more

where expertise comes together
- since 1996 -
NDT-Slovenia 2009

10th International Conference of the Slovenian Society for NDT, September 1-3, 2009, Ljubljana, Slovenia

Share ...     

Keywords Authors & Institutions
Table of Contents
60 Articles in
Issue: 2009-10
Title / Author(s) / Keywords Session
Acoustic Emission
Study of the Mechanical Response of Carbon Reinforced Concrete Beams using Non Destructive Techniques During a Four-Point Bending Test
D. Zarouchas3, A. Makris, D. Van Hemelrijck18
Dept. Mechanics of Materials and Constructions; Vrije Universiteit Brussel (VUB) 54, Brussel, Belgium
Acoustic Emission (AE), localisation of damage, Other Methods, Digital Image Correlation, 3D imaging, adhesives, crack, defect characterization, crack detection
Acoustic Emission
Acoustic Emission
NDT of Freeze-Thaw Damaged Concrete Specimens by Nonlinear Acoustic Spectroscopy Method
M. Matysík22, M. Kořenská44, I. Plšková11
aFaculty of Civil Engineering, Physics Department bFaculty of Civil Engineering, Department of Physics; Brno University of Technology (BUT)225, Brno, Czech Republic
Acoustic Emission
Acoustic Emission
Assessment of Laser Cutting Quality using Acoustic Emission Signals
T. Kek25, J. Grum78
Faculty of Mechanical Engineering; University of Ljubljana99, Ljubljana, Slovenia
Acoustic Emission (AE), acoustic emission sensor, Burst AE, frequency analysis, signal processing, statistical analysis, detection, Laser cutting, Carbon steel, surface cracks
Acoustic Emission
Acoustic Emission
Evaluation of Ceramic Tiles Frost Resistance using Impact Echo Method
I. Plšková11, M. Matysík22, Z. Chobola17
aFaculty of Civil Engineering, Physics Department bFaculty of Civil Engineering, Department of Physics; Brno University of Technology (BUT)225, Brno, Czech Republic
Acoustic Emission (AE), NDT, Impact Echo, experiment, ceramics, frost, civil engineering
Acoustic Emission
Acoustic Emission
Results of Utilization of Loading Frequency and Continuous Sampling of Ae Signal for Detection of Fatigue Damage of Almg Alloys
P. Mazal55, F. Vlašic26, F. Hort14
Faculty of Mechanical Engineering; Brno University of Technology (BUT)225, Brno, Czech Republic
Acoustic Emission (AE), early damage detection, Aluminium, fatigue damage, Fatigue, Fatigue Crack
Acoustic Emission
Acoustic Emission
Following Concrete Hardening by Help of Non Destructive Methods
L. Pazder144, V. Bílek215, J. Smutn119, L. Topolá116, M. Lunak116, I. Kusák119
1Faculty of Civil Engineering, Department of Physics; Brno University of Technology (BUT)225, Brno, Czech Republic
2ZŽPSV A.S. Company12, Uhersky Ostroh, Czech Republic
Civil Engineering, Concrete, Concrete, Hardening
Acoustic Emission
Acoustic Emission
Effect of Various Sensor Setting Up for Acoustic Emission Detection During Resistance Spot Welding
I. Polajnar18, E. Esmail22, T. Kek125, J. Grum178
1Faculty of Mechanical Engineering; University of Ljubljana99, Ljubljana, Slovenia
2Faculty of Engineering ; Alexandria University 4, Alexandria, Egypt
Acoustic Emission (AE), acoustic emission sensor, early damage detection, frequency analysis, signal processing, automotive, spot weld, Carbon steel
Acoustic Emission
Acoustic Emission
Identificatio of Crack Appearance by Sound Emission During Steel Quenching
F. Ravnik5, J. Grum78
Faculty of mechanical engineering; University of Ljubljana99, Ljubljana, Slovenia
Electromagnetic Testing (ET), Quenching, Acoustic spectrograph, Internal stresses, Cracking, Sound emission, Sound pressure level
Acoustic Emission
Electromagnetic Methods
Sizing Defects much Deeper than the Depth of Penetration From Eddy Current Signals
N. Yusa1,24, K. Miya14
1International Institute of Universality5, Tokyo, Japan
2University of Tokyo63, Tokyo, Japan
Electromagnetic Methods
Electromagnetic Methods
Electromagnetic Imaging using Probe Arrays
G. Mook160, F. Michel118, J. Simonin123, J. Simonin26
1Institut für Werkstofftechnik und -prüfung; University of Magdeburg (OVGU)87, Magdeburg, Germany
2Nantes Angers le Mans University (LUNAM), Laboratoire Central des Ponts et Chaussées (LCPC)52, Bouguenais, France
Electromagnetic Testing (ET), eddy current testing probe array, Aluminium
Electromagnetic Methods
Electromagnetic Methods
Electromagnetic Nondestructive Evaluation of Honeycomb Structures with Conductive Skins and Core
P. Barsanescu110, R. Steigmann255, R. Grimberg250
1Faculty of Mechanical Engineering; Gh Asachi Technical University 19, Iasi, Romania
2Nondestructive Testing Department; National Institute of R&D for Technical Physics75, Iasi, Romania
Electromagnetic Testing (ET), eddy current testing (ECT), eddy current testing probe, aerospace, honeycomb
Electromagnetic Methods
Electromagnetic Methods
Numerical Method for the Magnetic Field Calculation with Eddy Current Testing
B. Brudar7
International Center for Sustainable Development7, Ljubljana, Slovenia
Electromagnetic Methods
Electromagnetic Methods
Dielectric Spectroscopy As a Diagnostic Test Method for the Determination of Mechanical Damage in Marble Samples
V. Saltas1, D. Triantis27, I. Stavrakas27, C. Anastasiadis27, F. Vallianatos1
1Laboratory of Geophysics and Seismology, Department of Natural Resources and Environment; Technical University of Crete7, Chania, Greece
2Department of Electronics; Technological Educational Institution of Athens9, Athens, Greece
Electromagnetic Testing (ET), impedance spectroscopy, frequency domain, permittivity, marble, conductivity testing, materials characterization
Electromagnetic Methods
Electromagnetic Methods
Non Destructive Testing of Cetris-Basic Wood-Cement Chipboards by using Impedance Spectroscopy
M. Lunak16, I. Kusák19, L. Pazder44
Faculty of Civil Engineering, Department of Physics; Brno University of Technology (BUT)225, Brno, Czech Republic
Electromagnetic Testing (ET), Impedance Spectroscopy, Model, Experiment, Concrete
Electromagnetic Methods
Electromagnetic Methods
Permittivity Variations on Marble Beams Subjected To Various Loading Levels
I. Stavrakas17, C. Anastasiadis17, S. Maurigiannakis22, D. Triantis17, Z. Agioutantis22
1Department of Electronics; Technological Educational Institution of Athens9, Athens, Greece
2Department of Mineral Resources Engineering; Technical University of Crete7, Chania, Greece
Electromagnetic Testing (ET), impedance spectroscopy, permittivity, marble, materials characterization, crack
Electromagnetic Methods
Electromagnetic Methods
Determination of Residual Stresses From the Barkhausen Noise Voltage Signal
J. Grum78, P. Žerovni5
Faculty of Mechanical Engineering; University of Ljubljana99, Ljubljana, Slovenia
Electromagnetic Testing (ET), barkhausen noise, impedance, permeability, Ferromagnetic Materials, stress, microstructure
Electromagnetic Methods
Electromagnetic Methods
Electromagnetic Testing-3 Near-Zone Fields Scattered by 3D Highly Conducting Permeable Objects in the Field of an Arbi Rary Current Source
R. Grimberg50, A. Savin65, S. Leitoiu9, A. Bruma27, R. Patrascu
Nondestructive Testing Department; National Institute of R&D for Technical Physics75, Iasi, Romania
Electromagnetic Testing (ET), eddy current, Scattering of electromagnetic field, archeology
Electromagnetic Methods
Electromagnetic Methods
NDT Based Process Monitoring and Control
B. Wolter23, G. Dobmann47, C. Boller78
Fraunhofer-Institute for Non-Destructive Testing (IZFP)475, Saarbrücken, Germany
Electromagnetic Testing (ET), microwave, 3MA, embedded sensor, Automated System, automotive, steel plant, reliability, quality control, robotic inspection
Electromagnetic Methods
Electromagnetic Methods
Automated Condition Assessment of Boiler Water Wall Tubes, using Remote Field Technology: a Revolution Over Traditional and Existing Techniques
A. Vajpayee10, D. Russell6
Russell NDE Systems Inc.14, Edmonton, Alberta, Canada
Electromagnetic Testing (ET), Remote Field Technology, power plant, Pulp & Paper, Petro Chemocal, paper, Pipeline, fatigue damage, flaw sizing, pitting corrosion, thickness, Oxide Scale, Quantitative, Hydrogen Blister, ASME, ASTM, ASNT
Electromagnetic Methods
Electromagnetic Methods
Eddy Current and Microwave Characterization of (Fe65,Co35)70Al30 Nanocrystalline Alloy Synthesized by Mechanical Alloying Process
A. Haddad17, M. Zergoug119, S. Bergheul22, M. Azzaz32
1aDivision des Procédés Electriques et Magnétiques bLaboratoire d’Electronique et d’Electrotechniqu; Scientific Research Center on Welding and NDT (CSC)68, Chéraga, Algeria
2Algeria Département d’Aéronautique; University of Blida10, Blida, Algeria
3Laboratoire de Science et Génie des Matériaux; University of Sciences and Technology Houari Boumedienne(USTHB)5, Bab-Ezzouar, Algeria
Electromagnetic Testing (ET), eddy current, eddy current testing probe, microwave, impedance, Magnetic Hysteresis Loop, Ductile iron, Radiographic Testing (RT), X-ray Refraction, aerospace, Ferromagnetic Materials, Metal Matrix Composites, mechanical alloying, magnetic properties, Magnetic Properties, nanostructure
Electromagnetic Methods
 
Page:
 -1-   2   3 
next pageNext
Actual Cooperations
Share...
We use technical and analytics cookies to ensure that we will give you the best experience of our website - More Info
Accept
top
this is debug window